Cable Suspension Clamps are used with through bolts, which serve as a clamping member, and are shaped to securely grip messenger wire to the pole. A nut and square washer is used between the clamp and the pole to provide proper spacing. Hot dip galvanized.

The TJ1095 is used for light cables and consists of the clamping members only. A 5/8" through bolt tightens the clamp on the wire as well as to the pole.

The TJ1096 and TJ25088.1 three-bolt clamps are used for heavier cables and are furnishedmore with a 5/8" through bolt hole. The TJ25088.1 keeper plate is flat.

The TJ26049 three-bolt clamp is also used for heavier cables and is furnished with a 3/4" through bolt hole. less