The Innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and swivels. A swivel head prevents twisting and binding of the innerductas it is installed. It eliminates the need for a separate swivel on each pulling eye when installing single innerducts into individual conduits or multiple innerducts into a single conduit. Its short length is an advantage on tight bends compared to using a separate swivel and pulling eye. Easily installed using a 1-3/8" deep socket or adjustable wrench.
NOTE: To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.). The I.D. measurement must be greater than dimension A and smaller than dimension B.
NOTE: To determine correct pulling eye size, obtain the actual innerduct inside diameter (I.D.). The I.D. measurement must be greater than dimension A and smaller than dimension B.
Unit of Measure
Specifications
Nom. Size (in.) |
N/A 1 to 1-1/4 |
Nom. Size (mm) |
N/A 25 to 32 |
Innerduct I.D. Range A to B (in.) |
N/A 1.06 to 1.43 |
Innerduct I.D. Range A to B (mm) |
N/A 27 to 37 |
Max. O.D. C (in.) |
N/A 1.75 |
Max. O.D. C (mm) |
N/A 44 |
Hole Diameter D (in.) |
N/A 0.44 |
Hole Diameter D (mm) |
N/A 11 |
Slot Width E (in.) |
N/A 0.56 |
Slot Width E (mm) |
N/A 14 |
Slot Depth F (in.) |
N/A 1.31 |
Slot Depth F (mm) |
N/A 33 |
Pin Diameter G (in.) |
N/A 0.44 |
Pin Diameter G (mm) |
N/A 11 |
Pin Center H (in.) |
N/A 0.56 |
Pin Center H (mm) |
N/A 14 |
Note |
N/A Will fit all Condux multiple pulling harnesses. |
